Fluid Bed Dryer

Working Principle

Air generated by the powerful blower is passed through a Fin tube radiator. The air which has now become hot is forced into the product container carries the product upward. This creates a very high fluidization effect, where each and every particle of the product comes into contact with the hot air. Due to this, heat transfer efficiency is increased and drying time is reduced considerably.

The conventional method of drying products in Tray Dryers is rather Time Consuming & troublesome. They occupy large floor space.

The product container shall have a Hollander weave mesh screen at the bottom. The container shall be mounted on a SS trolley with castor wheels which shall enable it to be moved around. The product container shall be lifted up to the SS 316 retaining chamber. It shall have an auto shaking device connected to the bags. All gaskets shall be of NeoPrene

Special Features of Vats & Vessels Fluid Bed Dryers

• Uniform & Rapid Drying.
• Occupies small Floor Space
• Absence of moving parts results in ease of maintenance.
• Capacity - 15 Kg. to 250 Kg
• Finger bag chamber with Fully automatic Bag Shaking
• Bucket type bottom chamber above ground level
• Pneumatic lifting & locking for product container with retarding chamber
• Fully automatic bag shaking
• Inlet-air filtration system with 0.3 micron Hepa filters
• Heating can be Electric Heating or Steam Heating Type.